Silent Stone Cracking Powder for Splitting Stone

• Customization: Available
• Application: Concrete Demolition
• Type: Sca-I; Sca-II; Sca-III; Sca-IV
• Speed: Fast
• for: Stone and Concrete
• Time: 2-6 Hours
• Transport Package: Pallets
• Specification: SGS, MSDS
• Trademark: BESLINK Splitstar
• Origin: Xiamen, Fujian
• HS Code: 25221000
• Production Capacity: 3000 Ton / Month

Product Description

Silent Stone Cracking Powder for Splitting Stone

Controlled Demolition / Dust free / Vibration Free / No license required
/ No flying debris / No toxic fumes / Environmental friendly / Silent Operation / Rapid usability / Ecomomy / Safety for vicinity


ADVANTAGES:
1. High range soundless cracking
SPLITSTAR expansive mortar is a soundless, non-explosive and safe demolition agent which is quite
Different from ordinary demolition agents such as explosives and dangerous materials. It does not cause
Any fly rock, noise, ground vibration, gas, dust orany other environmental pollution when used properly.
Eliminates noise, fly rock and vibration potential caused by blasting or heavy mechanical means.
2. No license required
Using SPLITSTAR expansive mortar does not require a special license unlike explosives, chemicals and
So on.
3. Rapid usability
Since rock or concrete previously cracked with SPLITSTAR expansive mortar is easily broken with
Breakers etc., the amount of time required for breakingof rock or concrete can be remarkably reduced.
4. Simple to use mixed
SPLITSTAR expansive mortar with a measured quantity ofwater and poured into the holes. Few minutes
After pouring a reaction of hydration is taking place generating heat and crystallizing and expanding while
Hardening. If hydration takes place under confinement, significant expansive pressure will result, No need
For detonator, ignition and professionaloperators. Also demolition work in water is possible.

WHAT IS EXPANSIVE MORTAR USED FOR?
1. Quarrying marble and granite, limestone, sand stone; Cracking nature ground
2. Breaking rock into pieces; Deposition of falling rocks
3. Demolishing concrete structure, Chipping defective concrete piles, etc
4. In the field as a new method of demolition, EXPANSIVE MORTAR can effectively be use in the conruction and civil engineering fields

Applications

A. Granite, marble, sandstone, limestone, quartzite quarrying and cutting

B.  Rocks pre-splitting, fracture, cutting, demolishing and removal

C.  Controlled demolition or cutting concrete when explosives not allowed

D.  Fracture and demolition of the concrete buildings and structures 

E.  Rocks cutting for road construction 

F.  Excavation of trenches and foundations 

G.  Underground excavations and removing boulders 

H.  Marine excavations including underwater operations

Package & Storage

Container and Storage Non-explosive demolition / cracking agent is packed in 4 anti-moisture bags of 5 kg (11 lb.) each and then placed in a water proofed carton with a total weight of approximately 20 kg (44 lb.).

Although Non-explosive demolition / cracking agent is packed in anti-moisture paper bags, long storage may cause deterioration of its working ingredients. Therefore, store in a dry place and use it as soon as possible.

When storing, do not place the bags of Non-explosive demolition / cracking agent directly on floor, put them on a pallet and keep in a dry warehouse etc. Non-explosive demolition / cracking agent, stored in this manner, can be effectively used for about 1 year.

Non-explosive demolition / cracking agent should be unpacked before use.

When storing the portion of Non-explosive demolition / cracking agent remaining after use, push the air out of the bag, then seal with gum tape and use as soon as possible. However, as it may get exposed to moisture there is a risk of Non-explosive demolition / cracking agent losing its effectiveness once the bag has been opened.

If you receive broken bags of Non-explosive demolition / cracking agent, they may not work due to chance of moisture absorption.

Type

Type of SPLITSTAR	Usable temperature
SCA-1	25°C-40°C  (77°F-104°F)
SCA-2	10°C-25°C  (50°F-77°F)
SCA-3	-5°C-10°C  (23°F-50°F)
SCA-4	40°C-50°C  (104°F-122°F)

Consumption

Hole diameter(mm)	30	32	34	36	38	40	42	44	46	48	50
Consumption(kg/m³)	1.2	1.3	1.5	1.7	1.9	2.1	2.3	2.5	2.8	3.0	3.2
Hole depth (m)	1

Quantity of splitstar used per 1m³

Kinds of objects to be demolished			Standard quantity of  splitstar per 1m^3
Rocks	Soft rock		5-8kg
	Medium rock		8-12kg
	Hard rock		12-20kg
Concrete	Plain concrete		5-8kg
	Reinforced concrete	Concrete including less quantity of re-bars	10-25kg
		Concrete including much quantity of re-bars	20-35kg
Bricks			10-25kg