Stone Quarry Pushing Pillows for Separating Blocks

• Customization: Available
• Certification: CE
• Condition: New
• Model NO.: BL2020
• Specification: CE
• Trademark: BESTLINK
• Origin: Xiamen, China
• HS Code: 39269090
• Production Capacity: 5000PCS/Month

Product Description

Stone Quarry Pushing Pillows for separating blocks
Polymer blocks pushing air bag is used to separate the marble, granite, stones(rock mass) block from the basic rock achieving a maximum opening of 45cm at the top. The air bag can separate the block (rock mass) which is having all side wire saw cut faces. The standard configuration set: Each set contains two air bags, with one set of air pipe & air control panel.   

Splitting and overturning pushing air bag operational procedure :

 

1. To avoid damages to the pushing air bag at deployment,start by carefully clearing the edges of the stone block of possible debris;

 

2. Consult the thrust table to determine the types and number of pushing air bag required to spread an opening 15cm between the     

    sawed block and the quarry;

 

3. Fasten one  end of two pull back ropes to the rings at the upper edge the bag and tie the other ends to fixed point;

 

4. Link the air supply through pressure gauge tube to the bag;

 

5. Begin the inflating  operation by opening the ball valve connected to the bag;

 

6. Continue inflating until obtaining opening of 10-15cm opening ,place appropriate metal wedges under the stone block;

 

7. Overlap the bags until overtuning block;

 

8. Shut off the air input valve of each bag,disconnected the hoses from the bag ,after the deflation is completed,pull out the bags.

 

Model		BL1005	BL1010	BL1510	BL1515	BL2015	BL2018	BL2020
Working dimensions(cm)		100×50	100×100	150×100	150×150	200×150	200×180	200×200
Thinckness(mm)		7	7	7	7	7	7	7