Expansive Mortar for Concrete Demolition En Colombia
Advantages:
Controlled Demolition / Dust free / Vibration Free / No license required
/ No flying debris / No toxic fumes / Environmental friendly / Silent Operation / Rapid usability / Ecomomy / Safety for vicinity
ADVANTAGES:
1. High range soundless cracking
SPLITSTAR expansive mortar is a soundless, non-explosive and safe demolition agent which is quite
Different from ordinary demolition agents such as explosives and dangerous materials. It does not cause
Any fly rock, noise, ground vibration, gas, dust orany other environmental pollution when used properly.
Eliminates noise, fly rock and vibration potential caused by blasting or heavy mechanical means.
2. No license required
Using SPLITSTAR expansive mortar does not require a special license unlike explosives, chemicals and
So on.
3. Rapid usability
Since rock or concrete previously cracked with SPLITSTAR expansive mortar is easily broken with
Breakers etc., the amount of time required for breakingof rock or concrete can be remarkably reduced.
4. Simple to use mixed
SPLITSTAR expansive mortar with a measured quantity ofwater and poured into the holes. Few minutes
After pouring a reaction of hydration is taking place generating heat and crystallizing and expanding while
Hardening. If hydration takes place under confinement, significant expansive pressure will result, No need
For, ignition and professionaloperators. Also demolition work in water is possible.
SPLITSTAR
PACKAGE:
SPLITSTAR expansive mortar is packaged in 4 anti-moistureplastic bags of 5 kgs (11 lb) each, and the
Bags are placed in a carton box with a total net weight 20 kgs (44 lb). 50 carton/1 ton, 1 tons per wood
WHAT IS EXPANSIVE MORTAR USED FOR?
1. Quarrying marble and granite, limestone, sand stone; Cracking nature ground
2. Breaking rock into pieces; Deposition of falling rocks
3. Demolishing concrete structure, Chipping defective concrete piles, etc
4. In the field as a new method of demolition, EXPANSIVE MORTAR can effectively be use in the conruction and civil engineering fields
| Types |
Usable Temperature |
| SCA-1 |
25°C-40°C(77°F-104°F) |
| SCA-2 |
10°C-25°C(50°F-77°F) |
| SCA-3 |
-5°C-10°C(23°F-50°F) |
Audited Supplier 
){kind=link}