Middle Air Pressure DTH Drilling Tools Button Bits for Water Well
DTH bit is also our main product. After mang years search, we have rich experience in development and manufacturing high quality products, which adopted high-quality raw materials, advanced technology and passed through strictly inspection.
1.Various air pressure down-the-hole drill bits
2.Low air pressure hole Dia.:65-220mm
3.High air pressure hole Dia.:85-305mm
4.Face type: drop center / concave / convex / double gauge / flat
Technical Data:
| Drill Bits |
Bit Dia. (mm) |
NO. of Air holes |
Gauge Buttons |
Front Buttons |
Weight (KGS) |
Part No. |
| BR1 |
64 |
2 |
6×φ10 |
3×φ10 |
2.6 |
HBR1-64 |
| 70 |
2 |
6×φ12 |
4×φ9 |
2.8 |
HBR1-70 |
| 76 |
2 |
6×φ12 |
5×φ10 |
3.2 |
HBR1-76 |
| BR2 |
76 |
2 |
6×φ12 |
5×φ10 |
3.6 |
HBR2-76 |
| 80 |
2 |
6×φ13 |
5×φ10 |
4 |
HBR2-80 |
| 90 |
2 |
6×φ13 |
6×φ10 |
4.2 |
HBR2-90 |
| HD25 |
76 |
2 |
6×φ13 |
5×φ10 |
3.6 |
HD25-76 |
| 82 |
2 |
6×φ14 |
4×φ11 |
4 |
HD25-82 |
| 90 |
2 |
8×φ12 |
5×φ12 |
4.2 |
HD25-90 |
We can design and manufacture according to customer's requirement of the bit dia., no. of air holes, carbide button shape and face shape.
----Selection of DTH BIT FACE SHAPE AND CARBIDE BUTTON SHAPE----
A: Bit face shape selection
DropCenter Bit
For high penetration rates in soft to medium-hard and fissured rock formations. Low to medium air pressures. Maximum hole deviation control.
Concave face
The all-round application bit face specifically for medium hard and homogenerous rock formations. Good hole deviation control and good flushing capacity.
Convex face
For high penetration rates in soft to medium-hard with low to medium air pressures. It is the most resistance to steel wash, and may reduce the load and wear on the gauge buttons, but poor hole deviation control.
Double Gauge face
This kind of face shape is suitable for fast penetration rates in medium to hard rock formations. Designed for high air pressures and good resistance to steel wash step gauge bit.
Flat Face Bit
This kind of face shape is suitable for hard to very hard and abrasive rock formations in applications with high air pressures. Good penetration rates an resistance to steel wash.
B: Insert Carbide Button Shape Selection
Matching the insert to the job requirements is essential in achieving the desired results. Different buttons is ideal for different ground conditions, abrasion levels, PSIs and penetration levels. In general, the larger the number of gauge buttons the better overall performance, especially in hard rock.
Package detailes for DTH hammers
Audited Supplier 
){kind=link}